Svec
FD1811 11Mbps Wireless LAN Access Point / Bridge  
Specifications
Standards IEEE 802.11b(Wireless LAN), IEEE 802.3(Ethernet)
Interface 10BASE-T RJ-45 for Ethernet, USB B-type connector for configuration

Frequency Band 2.400~2.497GHz ISM band
(channel 1~14, subject to local regulations)
Number of Channel USA: 11 Europe: 13 Japan: 14
Spreading DSSS(Direct Sequence Spread Spectrum)
Transmission rate 11Mbps, 5.5Mbps, 1Mbps auto sensing
Transmit Power Minimum 13dBm typically
Receive Sensitivity
11Mbps: Typical-84dBM@8% PER(Packet Error Rate)
2Mbps: Type-90dBm@8% PER(Packet Error Rate)
Modulation Schemes DBPSK/ DQPSK/ CCK
Media Access Protocol CSMA/ CA with ACK
Range Coverage
Indoor:50m~100m(depends on the environment)

Outdoor:100~500m(depends on the environment)
Network Management
SNMP
TFTP (firmware download)
Set IP Session(arp/ping)
DHCP client
Wiwdows-based configuration utility via USB and Ethernet
Security 64-bit and 128-bit WEP Encryption
Antenna Dual diversity antennas with 2dB gain
LED indicator Power, LAN and WLAN
Driver Support Windows 98/2000/ME/XP
Power Adapter 5V DC, 1A
EMC certification
FCC part 15.247 for US
ETS 300 328 for Europe
ARIB STD-T66 for Japan
Temperature Range 0~55 (Operating), -25~70 (Storage)
Humidity 10%~95% RH, Non-condensing
Dimensions( W x H X D) 139.5 x 114.5 x 29.4 mm without antenna
Weight 180g